1W MR11 (GZ4) LED Spot Light Replacement Bulb

Type：Bi-Pin
Total Power Consumption：1 Watt
Operating Voltage：12VDC
Base：GZ4 (MR11)
Beam Pattern：30 degree
Bulb Type：MR11
Optional Color: Warm White, Pure White
Color Temperature (K)：Warm White(2700-3500K), Pure white(6000-7000K)
LED Quantity：1 LED
Efficacy：60 lm/w
IP Rating：Non-Weatherproof
Lens Color：Clear
Operating Temperature: -20~+45 °C
Storage Temperature: -40~+85 °C
Size:Ф34.5×47.5mm
Lifetime：50000 Hour
Warranty:2 years

How to install MR11 LED light bulbs:

1.Remove the non-functioning bulb from its socket. This can usually be done by removing a retaining clip with your fingers, then removing the UV-coated circular glass pane. After the UV glass pane is removed, you can pull the bulb and wiring harness from the housing. Remove the bulb by pulling it away from the harness with one hand while holding on to the harness with the other.
2. Insert the new bulb by pressing the two exposed pins on the rear of the bulb into the two holes in the harness.
3. Replace the bulb and harness into the housing, then replace the glass pane and retaining clip.