4 Pin L Shape For Width 10mm RGB Color Changing LED Strip Light
Special Price
$0.89
Regular Price
$1.00
In stock
SKU
LN00500
- Buy 5 for $0.83 each and save 7%
- Buy 10 for $0.80 each and save 10%
- Buy 30 for $0.73 each and save 18%
These L shape connectors for RGB multi-color light strips. They come with 2 easy-clasp connectors and a 90 degree L shape PCB board. You can attach it with your light strips directly without any tools or welding operations. The wireless design ensures a seamless layout when you need to come across your light strips around sharp corners. They are compatible with both water and non-waterproof 10mm RGB light strips. Our connector can support up to 72W. With supporting high wattage, you can not only use a low wattage light strip but also a high wattage light strip.
Installation tips: Open the cap on the connector and slide in the ribbon. Make sure the pins match correctly, then clasp the cap. For waterproof light strips, you need to peel off the silicone around the soldering line first. To avoid electric shock and burn, please turn off the power before cutting and reattaching light strips.
Installation Instructions: 1.Open the clip on the side 2.Slid the 10mm LED light strip inside the clip underneath the two contact prongs 3.Make sure the side of the strip aligns with the "+ -" polarity 4.Close the wire clip
Write Your Own Review
We found other products you might like!