SK6812 RGBW 96LEDS/M DC5V Digital Intelligent Addressable LED Strip Lights, 5m Reel
- Buy 5 for $115.60 each and save 6%
- Buy 10 for $110.68 each and save 10%
- Buy 30 for $103.30 each and save 16%
Specifications
Input voltage: DC5V
Power: 38.4watt/meter,192watt/roll
LED Chip Model: SMD 5050
LED resource: SK6812 LED
Q'ty of LED: 96 LEDs/Meter Available
IC Type: SK6812IC (1 IC drives 1 led chip)
Q'ty of IC: 96 pixel /Meter
Cuttable: every LED is cuttable
Dimensions: L500cm(196.85 in ) x W1.0cm(0.39 in ) x H0.25cm(0.1 in )
Color Temp(K): RGB full color
FPC color: WHITE/BLANK PCB
Protection rate: Non-waterproof or IP 65( gel coating) IP67 waterproof (sealed in silicone tube)
Colors: Full color RGB, dream color changing;
Grey scale: 256
Bits/color: 8-bits/color;total 24bit for RGB color
LED wavelengths: 630nm/530nm/475nm
Average Life (hrs): 50000Hours+
There are 96 Addressable RGBW/WWA LEDs per meter, and 10mm wide for the 96LEDs/meter, DC5V input, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).
The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip.
Only 1 digital output pin is required to send data down.
The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.
The SK6812 is very similar to the WS2812B, and it can be used as a drop-in replacement in most applications because it features the same interface and color order (so LED strips based on the SK6812 and WS2812B can be chained together). The main difference between the two drivers is that the SK6812 has voltage-independent color and brightness over a wide voltage range, which means that the colors of the LEDs should not be affected by a drop in the supply voltage as much as they are on the WS2812B.
