WS2811 NeoPixel Digital RGB LED Strip, 60 Chip-built-in SMD5050 LEDs per Meter

Rating:

100% of 100

Special Price $105.00 Regular Price $134.00

In stock

SKU

LN-DS-2811-60C

There 60 pcs built-in WS2811 digitally-addressable RGB LEDs per meter of strip, and you can control each LED individually! You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Model: WS2811 neopixel digital RGB LED strip
Input voltage: DC5V
Led Qty: 60 pcs SMD 5050 per meter
IC Qty: 60 pcs built-in WS2811 per meter
Wave length(NM):R-650mcd, G-520mcd,B-460mcd
Power(W/M):14.4W/M
Signal: WS2811 chip
Dimension: 500*10*2.2mm
View angle: 120 degree
Optional Background Color: White
Optional Waterproof Type:
1. Non-waterproof: PCB (Printed Circuit Board) material with self-adhesive back.
2. Silicon Tube waterproof IP67: enveloped by silicone tube, and with two ends sealed by gel. Without self-adhesive back.
Life span: no less than 50000hrs
Packaging: 5M/reel in antistatic bag

They come in 5 meter (16.4ft) reels with a 3-pin JST SM connector on each end(Green=5V DC, Red=Data/Clock, Black=Ground). To wire up these strips we suggest picking up some JST SM plug and receptacle cables. If you want to connect to the input of a 4 meter cable (to wire it to power and a microcontroller) please get a receptacle connector. If you want to connect to the output, get a plug cable. If you are getting a less-than-5 meter strip, you'll probably want one of each to make it easy to connect and disconnect. You will also probably want a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it.