Wall Mount LED Color Wheel Touch Screen Controller, 12-24VDC, 4A/CH

Input voltage: DC12~24V
Output power: 12V: <144W, 24V: <288W
Packing size: 145(L)*99(W)*53(H) mm
Output current: <4A（each channel）
Connection mode: common anode
Static power consumption: <1W

This RGB LED controller is adopted with high precision capacitance touch control chip which will significantly increase the touch sensitivity and effectively reduced errors in operation.

The touch panel dimmer can achieve accurate & diverse adjustment on LED strip light’s color,mode and brightness by a rainbow color control wheel and five simple buttons. 20 static solid color states and 19 dynamic states can be achieved, while 10 grades of changing speed and theoretically 255 levels of brightness can be chose.

Glass panel screen provides incomparable touch feelings for users and ensures smooth operation. The dimmer is also made to be very easy to clean and thus suitable for frequent usage.

You can use this dimmer to work with a variety of RGB multi-color LED lighting fixtures.For instance,12Volts LED light bulbs, 5050 and 3528 LED flexible single color strip light, ceiling lights, panel lights etc.

Installation Guide:

1. Gently pry gaps in touch panel with a screwdriver, and then slowly remove the panel cover
2. Wiring: connect wiring according to your application. Refer to typical application diagram included in the package
3. Install switch base: mount the controller on the cassette in the wall after connecting the wire, and then nail the screw, fix it on the wall, then install the switch pedestal on the wall;
4. Close up touch panel cover. 

Pre-programmed modes include: