2.4G 9Watt E27 RGB+White Smart LED Light Bulb with RF Remote, Smartphone or Tablet WiFi Compatible
This globe type LED replacement bulb for traditional medium screw base lamps. Color selection wheel on remote provides thousands of color options, a bright pure white can also be selected for task lighting. Consumes 13.2 Watts of power using five x RGB 5050SMD and fifteen x 5630SMD LEDs. Includes hand held RF Touch Color Remote. (Requires 2 x AAA batteries -- Not Included). Control range is 65 feet in open air. Multi-Zone function to control up to four separate zones of LED bulbs that can be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Hub.
Base: E26/E27 (Medium)
Color: RGB+Warm White or RGB+White
Lumen: 850 Lumen
Total Power Consumption 13.2 Watts
Volts: 85~265 VAC
Current Draw: 110mA
LED Type: 5050 SMD/5630 SMD
LED Amount: 20 LEDs
Remote Battery Type: 2 x AAA (Not included)
Linking Lights to Remote Zones
RGB(W) lights are controlled exclusively by the multi-zone RF remote via the controller.
Linking a Light to the Remote
1. Switch off the main power supply to the light.
2. Restore power and within 3 seconds, choosing one of the “Zone On” (|) buttons,depress the button until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone and can be controlled via the remote.
Activating a Zone
To activate a specific zone, depress the “Zone On” (|) button. The zone is now active and remote commands will only affect lights linked to that zone.
Unlinking a Light to the Remote
1. Determine which zone the light is linked to. This can be done by testing the Zone On/Off controls for each zone on the remote.
2. Switch off the main power supply to the light.
3. Restore power and within 3 seconds, depress one of the “Zone On” (|) buttons until the light flashes 10 times, indicating that the light has been unlinked.
An unlimited number of RGB(W) lights can be linked to a zone, and all lights linked to that zone will respond to the commands entered on the wireless remote. Conversely, a single RGB(W) light can be linked to multiple remotes. When the light is unlinked, it will be unlinked to all remotes.
Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m)
